Título
Lensmeter using a lateral shearing interferometer
Autor
Fermín Salomón Granados Agustín
ALBERTO JARAMILLO NUÑEZ
JOSE DANIEL SACRAMENTO SOLANO
MARIA ELIZABETH PERCINO ZACARIAS
ANSELMO ALEJANDRO CORNEJO RODRIGUEZ
Nivel de Acceso
Acceso Abierto
Materias
Resumen o descripción
The use of a laser shear interferometer for checking the collimation condition within a lensmeter is proposed. The interferometer consist of a wedged glass plate which produces a shear along the ortogonal direction to the wedge; when the fringes at the center of the pattern are parallel to the shear, the collimation condition is attained. The feasibility of the proposal for measuring the vertex power is experimentally shown and the accuracy of the method is under 5% of the measured value being an improvement to the commercial instruments based on the focusing of a reticule.
Editor
Optik
Fecha de publicación
agosto de 2012
Tipo de publicación
Artículo
Versión de la publicación
Versión aceptada
Recurso de información
Formato
application/pdf
Idioma
Inglés
Audiencia
Estudiantes
Investigadores
Público en general
Sugerencia de citación
Granados Agustín, F. S., et al., (2012), Lensmeter using a lateral shearing interferometer, Optik. Vol.123(16):1425-1428
Repositorio Orígen
Repositorio Institucional del INAOE
Descargas
305