Título
EFFECT OF COOLING RATE DURING SOLIDIFICATION ON THE HARD PHASES OF M23C6-TYPE OF CAST CoCrMo ALLOY
Autor
MELVYN ALVAREZ VERA
ALEJANDRA HERNANDEZ RODRIGUEZ
Nivel de Acceso
Acceso Abierto
Materias
Resumen o descripción
Microstructural morphology of CoCrMo alloy by control of the cooling rate during the solidification was investigated.
Samples were obtained using both an induction furnace for slow cooling rate and electric arc furnace for fast
cooling rate. Microstructural characterizations were performed with metallographic techniques. It was found that
the difference between the formation temperature of hard secondary phases of M23C6-type carbides determine the
reduction of carbide size by increasing the cooling rate.
Fecha de publicación
2016
Tipo de publicación
Artículo
Versión de la publicación
Versión publicada
Recurso de información
Formato
application/pdf
Fuente
UDC – UDK 669.25.26.28:621.747:66.065:621.56/.59:620.18=111
Idioma
Inglés
Sugerencia de citación
M. ALVAREZ-VERA, A. HERNÁNDEZ-RODRÍGUEZ, M. A. L. HERNÁNDEZ-RODRÍGUEZ, A. JUÁREZ HERNÁNDEZ, J. R. BENAVIDES-TREVIÑO, J. H. GARCÍA-DUARTE (2016). EFFECT OF COOLING RATE DURING SOLIDIFICATION ON THE HARD PHASES OF M23C6-TYPE OF CAST CoCrMo ALLOY. METABK 55(3) 382-384 (2016). ISSN 0543-5846.
Repositorio Orígen
COMIMSA
Descargas
308