Título
Wear behavior in Al2024–CNTs composites synthesized by mechanical alloying
Autor
JOSE LUIS BUENO ESCOBEDO
IVANOVICH ESTRADA GUEL
MARIO MIKI YOSHIDA
LILIANA LICEA JIMENEZ
ROBERTO MARTINEZ SANCHEZ
Nivel de Acceso
Acceso Abierto
Referencia de datos
doi: http://dx.doi.org/10.1016/j.wear.2012.05.016
Materias
Resumen o descripción
The wear behavior of the 2024 aluminum alloy and its composites was evaluated through a pin-on-disk system. For this purpose the aluminum alloy was reinforced by carbon nanotubes dispersion produced by milling process. The nanotubes dispersion was carried out using a high energy mill for a fixed milling time. Milled powders were cold consolidated, sintered and then microstructurally and mechanically evaluated. The wear behavior of the alloy and its composites was evaluated considering the different nanotube contents under several abrasive conditions. The composites with higher nanotube concentration (5.0 wt%) displayed an improved wear resistance in all cases evaluated in this work.
Fecha de publicación
15 de julio de 2012
Tipo de publicación
Artículo
Recurso de información
Formato
application/pdf
Idioma
Inglés
Relación
&
Martínez-Sánchez, R. (2012). Wear behavior in Al 2024–CNTs composites synthesized by mechanical alloying. Wear, 292, 169-175.
Sugerencia de citación
Perez-Bustamante, R., Bueno-Escobedo, J. L., Jimenez-Lobato, J., Estrada-Guel, I., Miki-Yoshida, M., Licea-Jimenez, L.,
Repositorio Orígen
Fuente de Objetos Científicos Open Access
Descargas
989