Búsqueda avanzada


Área de conocimiento




23 resultados, página 2 de 3

Optimización multi-objetivo enfocada en la integración del diseño y control en secuencias intensificadas para la purificación de ácido levulínico

HERIBERTO ALCOCER GARCIA (2018, [Tesis de maestría])

El ácido levulínico (AL) producido a través de la hidrolisis ácida, ha atraído el interés de los grupos de investigación al ser materia prima para la producción de gran número de productos químicos. Estudios recientes han propuesto métodos alternativos para separar y purificar el ácido levulínico de la corriente diluida obtenida de la hidrólisis. Estas alternativas ofrecen ahorros energéticos y económicos. Sin embargo, pocos estudios han analizado la parte ambiental y las propiedades de control que involucra la separación de la mezcla furfural, ácido levulínico, ácido fórmico y agua. Por tanto, en este trabajo de tesis se propuso una metodología que conjunta el diseño y la evaluación del control de alternativas intensificadas para la separación de esta mezcla. Los diseños fueron optimizados utilizando el método de evolución diferencial con lista Tabú, tomando como funciones objetivo: el costo total anual y el Eco-indicador99, seguido de un análisis de controlabilidad utilizando los índices:matriz de ganancias relativas, número de condición y un índice de sensibilidad. Este análisis fue extendido a varios procesos de destilación híbridos, incluidos los convencionales, pared divisoria con decantador, pared divisoria con decantador y acoplamiento térmico y doble pared. Los resultados de las optimizaciones indicaron que los esquemas de pared divisoria y decantador presentan los mejores resultados, ya que el incremento de los flujos internos de la columna de doble pared y la columna de pared divisoria con acoplamiento térmico, causo que se incrementaran los valores del costo total anual y Eco-indicador99. Además, a través del análisis del control se pudieron obtener directrices entre la matriz de ganancias relativas y el número de condición, ya que los diseños que presentaron menores valores de número de condición total son los que presentan una estructura de control estable en todo el rango de frecuencia estudiado / Heriberto Alcocer García ; Directores: Juan Gabriel Segovia Hernández, Oscar Andrés Prado Rubio, Eduardo Sánchez Ramírez, Juan José Quiroz Ramírez

CGU- Maestría en Ingeniería Química (Integración de Procesos) BIOLOGÍA Y QUÍMICA Ácido levulínico - Purificación EI99 (Eco-indicador 99) Mezcla furfural Método de evolución diferencial

Propiedades fisicoquímicas del aceite de semillas de Jatropha curcas de poblaciones silvestres en México

NIDIA ARAIZA LIZARDE MIGUEL ANGEL ANGULO ESCALANTE TEODORO REYNOSO GRANADOS MARIA MAGDALENA ORTEGA NIEBLAS Lilia Alcaráz Meléndez Pedro Cruz Hernández (2015, [Artículo])

"Existe la necesidad de estudiar fuentes renovables de energía a partir de plantas oleaginosas con este potencial. La semilla de Jatropha curca se caracteriza por su alto contenido de aceite. En México solo existen estudios enfocados en evaluar las propie-dades fisicoquímicas del aceite de J. curcas silvestre y cultivada en la región sur. El objetivo de este trabajo, fue evaluar las propiedades fisicoquímicas del aceite de J. curcas silvestre en tres ecotipos del estado de Sinaloa (noroeste de México) y su aplicación en la elaboración de biodiesel. Los resultados obtenidos fueron que el contenido de aceite del germen fue de 52 a 56%. La viscosidad, densidad específica, índice de acidez, peróxido, yodo y refracción no mostraron diferencias significativas en las semillas colectadas en los tres ecotipos en estudio. Los ácidos grasos saturados más abundantes fueron el palmítico (4 a 6%) y esteárico (3 a 4%). Los ácidos grasos insaturados más abundantes fueron el oleico (44 a 46%) y linoleico (42 a 44%). Las características fisicoquímicas del aceite de J. curcas de Sinaloa son similares a las del sur de México y otros países, esto sugiere que el germoplasma del noroeste del país podría ser considerado para su conservación, aprovechamiento racional y producción de biodiesel."

"The need for studying sources of renewable energy is important starting from potential oleaginous plants. Jatropha curcas seed is characterized by its high oil content. In Mexico studies are focused on evaluating the physicochemical properties of J. curcas oil in wild plants cultivated in the southern region. The objective of this study was to evaluate these properties in three ecotypes of wild J. curcas of Sinaloa and their oil application in biodiesel production. The oil content of the germ was found to be 52 to 56%. Viscosity, density, acidity index, peroxide, iodine, and refraction showed no signif-icant differences in the seeds collected from the three ecotypes in our study. The most abundant saturated fatty acids were palmitic (4 to 6%) and stearic (3 to 4%). The most abundant unsaturated fatty acids were oleic (44 to 46%) and linoleic (42 to 44%). Physi-cochemical characteristics of J. curcas oil of Sinaloa specimens are similar to those of southern Mexico and other countries, which suggest that the germplasm of the north-western part of the country could be considered for conservation, rational utilization, and biodiesel production."

Fatty acid, ecotype, fatty acid, physicochemical analysis Ácidos grasos, biodiesel, ecotipos, análisis fisicoquímicos, Jatropha BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA BIOQUÍMICA LÍPIDOS LÍPIDOS

Simulación de los procesos geoquímicos en jales mineros

Yann Ramos-Arroyo ANNE MARGRETHE HANSEN HANSEN CHRISTINA DESIREE SIEBE GRABACH (2006, [Artículo])

Para conocer el comportamiento de drenajes ácidos de residuos mineros se modelaron los procesos

geoquímicos que controlan la solubilidad de elementos potencialmente tóxicos (EPT): As, Cu, Pb y Zn en depósitos de jales. Se utilizó el programa de equilibrio hidrogeoquímico PHREEQC2, utilizando datos de la composición de un yacimiento epitermal del distrito minero de Guanajuato, México. Estas simulaciones describen el potencial de acidificación y liberación de EPT al oxidarse los sulfuros. Se simularon adiciones secuenciales de calcita para probar el efecto del pH en los procesos que controlan la solubilidad de los EPT (precipitación de fases secundarias y/o adsorción en la superficie de ferrihidrita). Los resultados indican que los drenajes ácidos de minas podrían controlarse añadiendo las cantidades adecuadas de calcita y metano para lograr la neutralización y un pH adecuado que permita la adsorción y/o precipitación de EPT.

Drenajes ácidos de minas Procesos geoquímicos Simulación CIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA

Tensile behavior of 3D printed polylactic acid (PLA) based composites reinforced with natural fiber

Eliana M Agaliotis BALTAZAR DAVID AKE CONCHA ALEJANDRO MAY PAT Juan Pablo Morales Arias Celina Bernal Alex Valadez González Pedro Jesús Herrera Franco Gwenaelle Proust JUAN FRANCISCO KOH DZUL José Gonzalo Carrillo Baeza Emmanuel Alejandro Flores Johnson (2022, [Artículo])

Natural fiber-reinforced composite (NFRC) filaments for 3D printing were fabricated using polylactic acid (PLA) reinforced with 1–5 wt% henequen flour comprising particles with sizes between 90–250 μm. The flour was obtained from natural henequen fibers. NFRCs and pristine PLA specimens were printed with a 0° raster angle for tension tests. The results showed that the NFRCs’ measured density, porosity, and degree of crystallinity increased with flour content. The tensile tests showed that the NFRC Young’s modulus was lower than that of the printed pristine PLA. For 1 wt% flour content, the NFRCs’ maximum stress and strain to failure were higher than those of the printed PLA, which was attributed to the henequen fibers acting as reinforcement and delaying crack growth. However, for 2 wt% and higher flour contents, the NFRCs’ maximum stress was lower than that of the printed PLA. Microscopic characterization after testing showed an increase in voids and defects, with the increase in flour content attributed to particle agglomeration. For 1 wt% flour content, the NFRCs were also printed with raster angles of ±45° and 90° for comparison; the highest tensile properties were obtained with a 0° raster angle. Finally, adding 3 wt% content of maleic anhydride to the NFRC with 1 wt% flour content slightly increased the maximum stress. The results presented herein warrant further research to fully understand the mechanical properties of printed NFRCs made of PLA reinforced with natural henequen fibers. © 2022 by the authors.

POLYLACTIC ACID (PLA) NATURAL FIBER HENEQUEN FIBER NATURAL FIBER REINFORCED COMPOSITE (NFRC) ADDITIVE MANUFACTURING 3D PRINTING MECHANICAL PROPERTY INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA DE MATERIALES PROPIEDADES DE LOS MATERIALES PROPIEDADES DE LOS MATERIALES

Dual function of EDTA with silver nanoparticles for root canal treatment–A novel modification

JUAN MANUEL MARTINEZ ANDRADE (2018, [Artículo])

The chelating and antimicrobial capacity of a novel modification of 17% EDTA with silver nanoparticles (AgNPs) (EDTA-AgNPs) was evaluated in-vitro for root canal treatment (RCT). The EDTA-AgNPs solution was characterized by UV-Vis spectroscopy, ?-potential and high-resolution transmission electron microscopy (HRTEM). Antimicrobial capacity was evaluated against Candida albicans and Staphylococcus aureus in planktonic and biofilm cells by broth macrodilution (24 h) and XTT assays, (1, 10 and 30 min) respectively. The chelating capacity of EDTA-AgNPs was assessed indirectly (smear layer removal) and directly (demineralizing effect) in bovine dentin at two silver concentrations, 16 and 512 ?g/ ml at 1 and 10 minutes of exposure time. Smear layer removal was evaluated by atomic force microscopy (AFM) and scanning electron microscopy (SEM). The demineralizing effect was determined by atomic absorption spectroscopy (AAS), microhardness test (MH) and X-ray diffractometer (XRD). Synthesized AgNPs were quasi-spherical in shape with an average size of 13.09 ± 8.05 nm. 17% EDTA-AgNPs was effective to inhibit C. albicans and S. aureus in planktonic and biofilm cultures. The smear layer removal and demineralizing effect were similar between 17% EDTA-AgNPs and 17% EDTA treatments. The 17% EDTA-AgNPs solution proved to be an effective antimicrobial agent, and has a similar chelating capacity to 17% EDTA alone. These in-vitro studies strongly suggest that EDTA-AgNPs could be used for effective smear layer removal, having an antimicrobial effect at the same time during RCT. © 2018 Martinez-Andrade et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

edetic acid, silver nanoparticle, edetic acid, metal nanoparticle, silver, antibacterial activity, antibiotic sensitivity, antifungal activity, antimicrobial activity, Article, atomic absorption spectrometry, atomic force microscopy, biofilm, bovine, BIOLOGÍA Y QUÍMICA CIENCIAS DE LA VIDA MICROBIOLOGÍA MICROBIOLOGÍA

Evaluación morfológica, bioquímica y diversidad genética del germoplasma silvestre de Jojoba (Simmondsia chinensis) y Jatropha (Jatropha curcas) del Noroeste de México

NIDIA ARAIZA LIZARDE (2016, [Tesis de doctorado])

Jojoba (Simmondsia chinensis) and jatropha (Jatropha curcas) are potential sources to obtaining oil for industrial purposes and production of biodiesel (Masayuki, 1976; Masayuki and Takeshi, 1980). The objectives of this study were to analyze the morphological characteristics of seeds, oil content, physicochemical parameters of lipid, fatty acids composition and genetic variability of ecotypes of jojoba and jatropha in the Northwest of Mexico. Three ecotypes of jojoba named Indígena la Huerta, Sonoyta, and Todos Santos were evaluated. Sonoyta seeds ecotype has the highest weight, length and thickness (0.82g, 15.98 mm and 9.28 mm). Significant differences in color and seed moisture were observed. The number of seeds per kilogram was higher in the ecotype Indígena la Huerta (1217). The oil content was between 43, 44 and 49% in the 3 ecotypes. Viscosity, density, index of acidity, peroxide, yodine and refraction showed no significant differences. The most abundant fatty acids were the Eicosanoic (52 to 62.43%), oleic (13.80 to 27.36%) and Palmitic (6.43-9.70%). ISSR analysis on the accessions of S. chinensis showed a 54% polymorphic. On the other hand 3 ecotypes of Jatropha curcas Estación Dimas, El Quelite and La Campana were analyzed. No significant differences in weight, length, thickness, humidity and number of seeds per kg. The color of the seeds was 60.80 to 65.64 °Hue. The oil content of the germ of J. curcas was 52 to 56%. Viscosity, density, index of acidity, peroxide, iodine and refraction showed no significant differences in the seeds collected in the three ecotypes in study. The most abundant saturated fatty acids were oleic (44 to 46%), linoleic (42 to 44%) and palmitic (4-6%). SSR analysis of J. curcas accessions showed expected heterozygosity (He) of 0.7524, 0.7092 and 0.7956 in ecotypes of La Campana, Estación Dimas and El Quelite respectively. The wild germplasm of jatropha and jojoba is an alternative in the cosmetics and energy industry and represents a potential for activating the economy in arid and semi-arid regions of México.

Jojoba (Simmondsia chinensis) y jatropha (Jatropha curcas) son fuentes potenciales para la obtención de aceite con fines industriales y para la producción de biodiesel (Masayuki, 1976; Masayuki y Takeshi, 1980). Los objetivos de este trabajo fueron analizar las características morfológicas de las semillas, el contenido de aceite, los parámetros fisicoquímicos de los lípidos, la composición de ácidos grasos y la diversidad genética de ecotipos de jojoba y jatropha en el Noroeste de México. Se evaluaron tres ecotipos de jojoba denominados Indígena la Huerta, Sonoyta y Todos Santos. Las semillas del ecotipo de Sonoyta presentaron el mayor peso, longitud y grosor (0.82 g, 15.98 mm y 9.28 mm). Se observaron diferencias significativas en el color y la humedad de la semilla. El número de semillas por kilogramo fue mayor en el ecotipo de Indígena la Huerta (1217 semillas). El contenido de aceite fue de 43 a 49% en los 3 ecotipos. La viscosidad, densidad específica, índice de acidez, peróxido, yodo y refracción no mostraron diferencias significativas. Los ácidos grasos más abundantes fueron el eicosanoico (52 a 62.43%), oleico (13.80 a 27.36%), y palmítico (6.43 a 9.70%). El análisis ISSR mostró un porcentaje polimórfico de 54 %. Por otro lado, se analizaron 3 ecotipos de Jatropha curcas denominados Estación Dimas, El Quelite y La Campana. No se observaron diferencias significativas en el peso, longitud, grosor, humedad y número de semillas por kilogramo. El color de las semillas fue de 60.80 a 65.64 °Hue. El contenido de aceite del germen de J. curcas fue de 52 a 56%. La viscosidad, densidad específica, índice de acidez, peróxido, yodo y refracción del aceite no mostraron diferencias significativas entre los ecotipos estudiados. Los ácidos grasos más abundantes fueron el oleico (44 a 46%), linoleico (42 a 44%) y palmítico (4 a 6%). El análisis SSR de accesiones de J. curcas mostró la heterocigosidad esperada (He) de 0.7524, 0.7092 y 0.7956 en los ecotipos de La Campana, Estación Dimas y El Quelite, respectivamente. El germoplasma silvestre de jojoba y jatropha es una alternativa en la industria cosmética y energética, representan un potencial para activar la economía en las regiones áridas y semiáridas de México.

ácidos grasos, semillas, ISSR, lípidos, jatropha, jojoba, SSR INGENIERÍA Y TECNOLOGÍA CIENCIAS TECNOLÓGICAS TECNOLOGÍA BIOQUÍMICA ACEITES Y GRASAS VEGETALES ACEITES Y GRASAS VEGETALES